DETAILED PRODUCT DESCRIPTION:

Electromagnetic Polarity Inverter for Moisture Control ATE LC15

Model: Powerful yet affordable.

Product: Made in France and guaranteed.

Installation: DIY! Quick and easy setup.

Moisture Control Overview: Wall moisture treatment involves addressing capillary rise, a physical phenomenon where moisture from the ground ascends into the walls. This issue affects all porous materials in contact with the earth. To stop capillary rise, the root cause must be eliminated.

Principle of Operation: Every wall naturally generates an electrical potential difference from the ground, which propagates moisture. The ATE LC15 moisture control unit generates a counter-current within the wall. This device, mounted directly on the wall, emits low electrical impulses towards the ground, reversing the polarity of existing electromagnetic fields in the wall and directing the water downward.

Advantages:

• Effective Wall Drying: Does not damage walls (no vibrations or drilling). Provides faster drying and addresses the root cause of the problem. Suitable for old or fragile walls. Effective.
• Drying Time: Walls will be dried within 18 to 24 months, depending on building specifics and adherence to recommendations.
• Improved Insulation: Enhances the natural insulating properties of walls, reducing heating costs due to less moisture.
• Low Impact: No noise or harmful emissions, and low electricity consumption.

Certifications:

• Directive 2014/35/EU (Low Voltage)
• Directive 2014/30/EU (EMC)
• Non-harmfulness of Electromagnetic Fields (EMF)
• Directive 2011/65/EU (RoHS)
• Directive 2012/19/EU (WEEE)

Product Benefits:

• Radical and Permanent Solution: Addresses wall moisture issues at the source.
• Effective and Rapid Results: Capillary rise is eliminated within 18 to 24 months (depending on building specifics and recommendations).
• Heating Cost Reduction: Less moisture in rooms reduces heating costs.
• 10-Year Manufacturer Warranty.
• Health-Safe: No harm to people, animals, or plants (tested by Emitech laboratory).
• Low Power Consumption.
• Easy Installation: No construction work needed, no noise, no dust.
• French Manufacturing.

Technical Specifications:

• Effective Range: 7.5 meters; maximum effective diameter 15 meters.
• Minimum Footprint: Simple unit plugged into a power outlet.
• Safety: Emission levels are below those of household appliances (washing machine, hairdryer, refrigerator, electric oven, or microwave).
• Current: 12V
• Consumption: 0.75W
• Dimensions: 322 x 232 x 32 mm
• Warranty: 10 years

What is the purpose of the ATE LC15 Electromagnetic Polarity Inverter? The ATE LC15 Electromagnetic Polarity Inverter is designed to tackle moisture problems in your home. It dries the walls by addressing capillary rise issues.

How does the ATE LC15 Electromagnetic Polarity Inverter work? The ATE LC15 generates a very low-frequency electromagnetic field that alters the orientation of water molecules. These molecules then fall back into the foundations due to gravity, taking with them some of the salts responsible for efflorescence and moisture stains. Wall drying occurs through natural evaporation of the moisture.

Installation Instructions for the ATE LC15 Electromagnetic Polarity Inverter:

1. Placement:

   • Must be positioned at least 1.5 meters away from any electrical or electronic devices.
   • Install between 30 cm to 1 meter above the floor.
   • Mount the unit on the wall like a picture frame.
   • Do not move the unit once installed.
   • Place directly on a load-bearing wall or a partition wall (not on drywall).
   • Know the dimensions of your home (especially the largest diagonal) to ensure the effectiveness of the unit covers the entire building.
   • The inverter must be permanently connected, with very low power consumption (only 0.75W, approximately €15/year).

2. Removal of Coatings or Filmogenic Coverings:

   • It is recommended to strip the lower part of the walls during the drying period to a height of about 10 cm above the degradation line to allow the walls to breathe.

3. Ventilation:

   • Good air circulation is necessary as drying occurs partly through evaporation.
   • Install appropriate ventilation in your home.
   • Ensure doors and windows meet standards (doors with a minimum gap of 1.5 cm in dry rooms and 2 cm in damp rooms).
   • Install vents on windows.

4. Restoration of Coatings and Painting:

   • Once the walls are dry, the hygroscopic salts that absorbed moisture will have migrated to the surface. It is essential to brush off most of these salts.
   • For optimal wall drying, ensure walls are dry and healthy and prevent mineral salts from rising into the coatings. Reapply facade coatings with lime and an additive against hygroscopic salts.

5. Installation of a Drain:

   • It is advisable to install a drain if there are lateral infiltrations. The drainage system collects groundwater and evacuates it before it reaches the foundations.

Important Information:

• Drying speed depends on wall thickness, composition, coating, and adherence to our recommendations.
• This process does not address infiltrations, flooding problems, or mold in your home; these issues must be treated separately.